Parma

Some Parma hop-ups were also sold in Japan under the Dirt Burners! brand. In addition to RC parts, Parma also had a lot of parts for slot cars. I have included all Parma parts in this index, both slot and RC, as quite a few of them actually overlaps.

This is how Parma numbered their parts, according to their January 1988 price list.

#200-1000 – Slot car pars
#1200-1300 – 1/8 On-road parts
#1400-1499 – 1/18 Cheetah parts
#1500-1600 – 1/24 Tamtech parts
#1800-8000 – 1/12 On-road parts
#10000-13000 – 1/10 Off-road parts
#15010-19000 – 1/10 On-road parts
#20010-25000 – RC Boat parts

As far as I can see it’s pretty accurate, but there are a few parts that I believe are in the wrong number series’. Somewhere along the line Parma changed their part numbering system, so there are a few instances with different parts on the same part number, or the same part with different part numbers. I have chosen to file them all in the index. Eg. #10705 is both the number decal “5” as well as a sponsor decal sheet, so both are indexed with that number.

When I have gone through all my Parma catalogs, and indexed all parts,  I will split this index into the number series shown above, for easier browsing.

Part #
Picture Description
#314 X
Daytona resistor 0.4 ohm.
#314 A
Daytona resistor 0.5 ohm.
#314 B
Daytona resistor 0.6 ohm.
#314 C
Daytona resistor 0.8 ohm.
#314 D
Daytona resistor 1 ohm.
#314 E
Daytona resistor 1 1/4 ohm.
#314 F
Daytona resistor 1 1/2 ohm.
#314 G
Daytona resistor 2 ohm.
#362
Finned Heat Sink.
#367
Resistor bolt & nut.
#516
Heavy duty gear puller.
#520A
6 tooth brass press on pinion .078 .050 for 1/18th scale Cheetah race car.
#520B
7 tooth brass press on pinion .078 .050 for 1/18th scale Cheetah race car & 1/18th scale Cheetah race car.
#520C
8 tooth brass press on pinion .078 .050 for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#520D
9 tooth brass press on pinion .078 .050 for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#520E
10 tooth brass press on pinion .078 .050 for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#522A
7 tooth steel pinion .078 1.00 for 1/18th scale Cheetah race car.
#522B
8 tooth steel pinion .078 1.00 for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#522C
9 tooth steel pinion .078 1.00 for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#550
4 wheel drive kit for womp womp. Pulley & belt.
#551
4 wheel drive kit for womp womp. Belt.
#614
1/8″ precision axle ball bearings for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#623
1/8″ axle oilites for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#640
1/8″ axle, 2 5/8″ long for 1/24th scale Bobcat RC race car.
#700-A
Parma paints for lexan bodies, thinner.
#700-B
Parma paints for lexan bodies, copper.
#700-C
Parma paints for lexan bodies, gold.
#700-D
Parma paints for lexan bodies, silver.
#700-E
Parma paints for lexan bodies, light green.
#700-F
Parma paints for lexan bodies, dark green.
#700-G
Parma paints for lexan bodies, light blue.
#700-H
Parma paints for lexan bodies, dark blue.
#700-I
Parma paints for lexan bodies, yellow.
#700-J
Parma paints for lexan bodies, white.
#700-K
Parma paints for lexan bodies, orange.
#700-L
Parma paints for lexan bodies, black.
#700-M
Parma paints for lexan bodies, light red.
#700-N
Parma paints for lexan bodies, dark red.
#700-P
Parma paints for lexan bodies, cranberry.
#700-Q
Parma paints for lexan bodies, magenta.
#701
Liquid mask.
#703
Body bullet proofing.
.007″ self-adhesive mylar tape.
.25″ wide x 6″ long – 16 pieces.
#705-A
1/32 Air control kits .004 side dams.
#710-B
Parma metal flake, silver.
#725
“Little squirt” oiler.
#738
Body mount clips.
#746
1/24th scale racing numbers.
#756
1/32 and 1/24 scale sponsor decals, 5 color.
#758
1/32 and 1/24 flame decals, 3 color.
#759
1/32 and 1/24 chips decals, 3 color.
#757-B
Hardee’s Days of Thunder decal sheet.
#765
Fuel proof racing numbers (self sticking).
#794B
Nylon spur gear, 56 tooth.
#794C
Nylon spur gear, 58 tooth. Black.
#794C
Nylon spur gear, 58 tooth. White.
#943
Monza GT body, clear lexan for 1/24th scale Bobcat RC race car.
#944
Porsche Carrera body, clear lexan for 1/24th scale Bobcat RC race car.
#950
Corvette body, clear lexan for 1/24th scale Bobcat RC race car.
#953
Miller Mustang body, clear lexan for 1/24th scale Bobcat RC race car.
#1310-A
1/8 scale RC interior, large .010 thick.
#1310-B
1/8 scale RC interior, small .010 thick.
#1310-C
1/8 scale RC interior .050 lexan.
#1322-A
Sports car wing for all 1/10 scale cars 91/2″ wide.
#1322-B
Formula & GT wing 8″ wide.
#1332
1/8 pretrued front donuts. Molded soft.
#1333
1/8 pretrued front donuts. Molded firm.
#1337
1/8 pretrued front donuts. Firm.
#1338
1/8 pretrued front donuts. Rockhard.
#1350
Hardee’s racing team decal sheet.
#1400
1/18th scale Cheetah RC race car.

Basic roller kit, chassis, motor mount, tires.

Less body & all electrics.

#1403
1/18th scale Cheetah RC race car.

Complete car kit, includes #1400 plus motor, batteries, resistor, reverse switch, painted lexan body & all electrics.

Less mini type servo radio system.

Lancia Beta body only.

#1406
1/18th scale Cheetah RC race car.

Assembled car, includes all in #1403 but fully assembled with mounted & painted body.

Less mini type servo radio system.

Sorbello body only.

#1408
.050 lexan monocoque chassis for 1/18th scale Cheetah race car.
#1410
Torque tube motor mount & spring for 1/18th scale Cheetah race car.
#1414
Steering blocks, king pin bolts & tir rods for 1/18th scale Cheetah race car.
#1416
Cheetah stub axle for 1/18th scale Cheetah race car.
#1418
Cheetah rear axle for 1/18th scale Cheetah race car.
#1420
Ball differential complete for 1/18th scale Cheetah race car.
#1420-A
44 tooth differential gear with balls for 1/18th scale Cheetah race car.
#1420-B
46 tooth differential gear with balls for 1/18th scale Cheetah race car.
#1420-C
47 tooth differential gear with balls for 1/18th scale Cheetah race car.
#1420-D
Differential hub & screw set for 1/18th scale Cheetah race car.
#1420-E
2 drive rings, spacer washers, spring & nut for 1/18th scale Cheetah race car.
#1420-F
Thrust bearing 1/8 x 5/16 for 1/18th scale Cheetah race car.
#1422-A
Cheetah spur gear, 44 tooth.
#1422-B
Cheetah spur gear, 46 tooth.
#1422-C
Cheetah spur gear, 47 tooth.
#1424
“Little” Ferrari motor with screws for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#1428-A
Front tires mounted & trued 5/8″ x 1 1/8″ for 1/18th scale Cheetah race car.
#1428-B
Silicone coated fronts for slippery surfaces for 1/18th scale Cheetah race car.
#1430-A
Rear tires mounted & trued 7/8″ x 1 1/4″ w/screw for 1/18th scale Cheetah race car.
#1430-B
Silicone coated rears for slippery surfaces for 1/18th scale Cheetah race car.
#1432
Front or rear replacement donuts for 1/24th scale Bobcat RC race car & 1/18th scale Cheetah race car.
#1434
6 cell battery pack for 1/18th scale Cheetah race car.
#1435
115 volt charger for 4 cell pack / 115 volt charger for 6 cell pack.
#1436
Cheetah 6 cell charge cord 12 volt.
#1438
Resistor mount bracket with screws.
#1440
2.5 ohm speed control resistor.
#1442
Resistor wiper arm with screws & washer.
#1444
Cheetah reverse switch kit.
#1446
Antenna support tube & mount for 1/18th scale Cheetah race car.
#1448
Body mount post with hardware for 1/18th scale Cheetah race car.
#1450
Vacuum formed wing for 1/18th scale Cheetah race car.
#1452
Cheetah wing wire kit.
#1453
1/18th scale numbers & meatballs.
#1454
1/18th scale clear lexan driver.
#1455
1/18 Lancia Beta clear lexan body.
#1455-P
1/18 Lancia Beta painted & trimmed lexan body.
#1456
1/18 Sorbello Sports clear lexan body.
#1456-P
1/18 Sorbello Sports painted & trimmed lexan body.
#1457
1/18 Porsche Group C Coupe clear lexan body.
#1457-P
1/18 Porsche Group C Coupe painted & trimmed lexan body.
#1458
1/18 VDS CanAm Sports Car clear lexan body.
#1458-P
1/18 VDS CanAm Sports Car painted & trimmed lexan body.
#1475
1/24th scale Bobcat RC race car.

Basic roller kit, lexan monocoque chassis, torque tube motor mount, mounted & trued tires & Porsche body.

Less all electrics.

#1476
1/24th scale Bobcat RC race car.

Complete car kit, includes #1475 plus motor, batteries, resistor, reverse switch, painted Monza body & all electrics.

Less mini type radio system.

#1477
1/24th scale Bobcat RC race car.

Assembled car, includes all in #1476, but fully assembled with mounted & painted Monza body.

Less mini type radio system.

#1478
.050 lexan monocoque chassis for 1/24th scale Bobcat RC race car.
#1479
Torque tube motor mount with screws for 1/24th scale Bobcat RC race car.
#1480
Steering blocks, king pins & tie rod for 1/24th scale Bobcat RC race car.
#1481
Stub axles, front, with E-clips for 1/24th scale Bobcat RC race car.
#1482
4 cell battery pack & holder for 1/24th scale Bobcat RC race car.
#1484
4 cell fast charge chord for 1/24th scale Bobcat RC race car.
#1485
Front tires mounted & trued 3/8″ x 1″ for 1/24th scale Bobcat RC race car.
#1486
Rear tires mounted & trued 5/8″ x 1 1/8″ for 1/24th scale Bobcat RC race car.
#1487
Monza GT body, painted for 1/24th scale Bobcat RC race car.
#1488
Porsche Carrera body, painted for 1/24th scale Bobcat RC race car.
#1489
Corvette body, painted for 1/24th scale Bobcat RC race car.
#1490
Miller Mustang body, painted for 1/24th scale Bobcat RC race car.
#1596
Off road resistor, standard dbl. barrel brake, .6 ohm.
#1598
Off road resistor, standard dbl. barrel brake, 1 ohm.
#1599D
1/10 Resistor – Epoxy coated.

1 Ohm std. dbl. barrel.

#1603C
1/10 Resistor – Epoxy coated.

.8 Ohm 90 deg. dbl. barrel.

#1723
Group 12 Spindle springs.
#1724
Group 12 kydex bumper.
#1726
Group 12 linkage kit.
#1747A
Shock kit (front) for Tamiya Frog.
#1747B
Shock kit (rear) for Tamiya Frog.
#1747
Group 12 rear axle.

Probably a crash between an old and a new numbering system. The new part number (#6110) is hand written on the package. I filed it under both.

#1760
Shock mount for Kyosho Scorpion.
#1778
Servo spacers & screws.
#1810
1/12 Euro Panther car kit.

Complete with front suspension, aluminum rear end assembly, .047 flex plate, resistor mount, adjustable body mounts, chassis, graphite differential axle, roll over antenna, tyres mounted on Panther wheels.

Less body and electrics.

#1939
March 802 Can-Am body shell.
#1951
Oscella PA9 body shell.
#1953
Ford Mustang Probe body shell.
#1956
MGA-1 McLaren body shell.
#1957
Lola T-900 Indy body shell.
#2118
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 4 speed.
#2119
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 5 speed.
#2120
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 6 speed.
#2215
1/12 adjustable wing wire.
#2220
1/12 RC wings, 3 rib.
#2222
1/12 RC wings, S shape.
#2224
1/12 RC wings, plain.
#2226
1/12 RC wings, V shape.
#2521
International sponsor decal, 5 color.
#2550
1/12 special body decals, Dodge.
#2551
1/12 special body decals, ?
#2552
1/12 special body decals, Toyota.
#2553
1/12 special body decals, Ralt.
#2554
1/12 special body decals, Capri.
#2555
1/12 special body decals, ?
#3005

1/12 Renault motor.

Stock Igarashi, 35 turns of 23 gauge.

Water dipped.

Came in at least two different versions, one with a silver can and a white endbell, while the other version has a blue can and a blue endbell.

#3006
Turbo Renault motor, water dipped, 1x35T.
#3012
Turbo Porsche Motor, water dipped, dyno tested, 32T of .22 gauge.
#3025
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 4 speed.
#3027
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 4 speed.
#3029
1/12 Vette Motor, adjustable timing, comm trued, balanced, shunted, brushes. 6 speed.
#3040
1/12 Ferrari Motor (6 cell 8 min.), 22 GA.
#3041
1/12 Ferrari Motor (6 cell 8 min.), 24-25 GA.
#3042
1/12 Ferrari Motor (6 cell 8 min.), 25-25 GA.
#3044
1/12 Ferrari Motor (6 cell 8 min.), 25-26 GA.
#3055
Yokomo motor 6 cell carpet.
#3060
Yokomo motor 6 cell asphalt.
#3530
Ferrari armature, 22 GA. Wire.
#3532
Ferrari armature, 25-25 GA.
#3534
Ferrari armature, 25-26 GA.
#3536
Ferrari armature, 6 cell 6 min.
#3538
Ferrari armature, 4 cell 8 min.
#3572-A
Motor springs, light tension.
#3572-B
Motor springs, medium tension.
#3572-C
Motor springs, heavy tension.
#3573
Yokomo shunted motor brushes, modified (hard).
#3574
Yokomo motor brushes, stock (medium).
#3577
Timed motor brushes. Advances timing of stock motors.
#3578
Cut motor brushes. Reduces bruch contact area.
#3579
Yokomo/Parma K motor brushes. Medium soft.
#3580
Yokomo/Parma K motor brushes. Medium hard.
#3582
Parma & Yokomo brush heat sink.
#3588
Motor cleaner, cleans carbon & dirt build-up.
#3590
Power spray, makes motor run faster and more efficient.
#4024
Low mount resistor bracket.
#4025
Resistor bracket for Euro Panther.
#4040
Motor capacitor (noise eliminator), 10 volt.
#4041
47uf can type capacitor (noise suppressor).
#4042
Motor capacitor kit. Reduces motor noise and interference.
#4045
1/12 scale diodes.
#4050
Silicone hook up wire, 2 feet.
#4055
2 pin connector, complete set.
#4056
2 pin connector, male end.
#4057
2 pin connector set, female.
#4519
Computer matched Sanyo batteries, 3 cell sticks, fits all cars using 6 cell stick configuration.
#4520
6 individual matched Sanyo cells, layout to your needs.
#4523
Silver plated battery jumper braid.
#4524
Battery pack discharging resistors.
#4525-A
Shrink wrap for three cell stick, white.
#4525-B
Shrink wrap for three cell stick, clear.
#4525-C
Shrink wrap for three cell stick, blue.
#4525-D
Shrink wrap for sub three cell stick, red.
#4530
AA nicad transmitter and receiver batteries.
#5503A
T-rubber donuts – yellow medium.
#5503B
T-rubber donuts – green firm.
#5505
1/12 RC rear donuts, soft.
#5508
1/12 RC rear donuts, med.
#5509
Pre-trued donuts, read med.
#5511
Pre-trued donuts, ft. med.
#5512
Pre-trued donuts, ft. med. firm.
#5513
Pre-trued donuts, front firm.
#5530
Nylon front wheels.
#6000-A
9T machined steel pinion.
#6000-B
10T machined steel pinion.
#6000-C
11T machined steel pinion.
#6000-D
12T machined steel pinion.
#6000-E
13T machined steel pinion.
#6000-F
14T machined steel pinion.
#6000-G
5T machined steel pinion.
#6000-H
16T machined steel pinion.
#6000-J
17T machined steel pinion.
#6000-K
18T machined steel pinion.
#6010
1/12 scale motor pinions, 10T.
#6011
1/12 scale motor pinions, 11T.
#6012
1/12 scale motor pinions, 12T.
#6913
1/12 scale motor pinions, 13T.
#6014
1/12 scale motor pinions, 14T.
#6015
1/12 scale motor pinions, 15T.
#6018-A
Aluminum pinions, 9T.
#6018-B
Aluminum pinions, 10T.
#6018-C
Aluminum pinions, 11T.
#6018-D
Aluminum pinions, 12T.
#6018-E
Aluminum pinions, 13T.
#6018-F
Aluminum pinions, 14T.
#6018-G
Aluminum pinions, 15T.
#6019-M
48 pitch steel pinions, 25T.
#6019-N
48 pitch steel pinions, 26T
#6019-O
48 pitch steel pinions, 27T.
#6019-P
48 pitch steel pinions, 28T.
#6019-Q
48 pitch steel pinions, 29T.
#6019-R
48 pitch steel pinions, 30T.
#6020
Schumacher nylon pinion with 4-40 set screw – 10 tooth.
#6020-A
64 pitch steel pinions, 18T.
#6020-B
64 pitch steel pinions, 19T.
#6020-C
64 pitch steel pinions, 20T.
#6020-D
64 pitch steel pinions, 21T.
#6020-E
64 pitch steel pinions, 22T.
#6020-F
64 pitch steel pinions, 23T.
#6020-G
64 pitch steel pinions, 24T.
#6020-H
64 pitch steel pinions, 25T.
#6021
Schumacher nylon pinion with 4-40 set screw – 11 tooth.
#6022
Schumacher nylon pinion with 4-40 set screw – 12 tooth.
#6023
Schumacher nylon pinion with 4-40 set screw – 13 tooth.
#6044
Replacement gears, 44 tooth.
#6046
Replacement gears, 46 tooth.
#6048
Replacement gears, 48 tooth.
#6110
Group 12 rear axle.

Probably a crash between an old and a new numbering system. The new part number (#6110) is hand written on the package. I filed it under both.

#6310
1/8″ precision differential balls.
#6315
Nylon lock nut, fits Parma-Assc. diff.
#6502
Castor wedges, 1-2-3 degrees.
#6516

Yellow (older package)

 

 

Pro Panther, 10 and 12 spindles.

 

 

Black (newer package)

#6521

Spindle springs for Euro Panther.
#7011
Machined read pod.
#7015
Panther axle and motor cams.
#7025
Panther wing tube.
#7070
Tiger wheel hubs for Associated & Jomac diff.
#7517
Flex plate, suspension Panther .062.
#7518
Flex plate, suspension Panther .047.
#7518-A
Flex plate, suspension Panther .032.
#7900
Silicone lube. Used on rotating parts.
#7910
Parma allen driver with .050 bit.
#7911
.050 replacement allen bits.
#8010
6-32 lock nut, suspension Panther.
#8019
Tiger wheel screws (3mm metric).
#8038
Super gripper hood pins.
#8039
Quick clip hood pins. Pre-bent for easy removal.
#8040
E-clip wheel retainers.
#8043
1/8″ snap rings. Fit Associated RC10 & others.
#8047
3″ tie wraps.
#8050
8″ tie wraps.
#8055
Servo tape 1/2″ x 6 ft. (or 1″ x 3 ft.) Super sticky.
#10200
Chevy Stepside 1/10 lexan body.
#10201
Chevy Blazer 1/10 lexan body.
#10202
Chenowth 1/10 lexan body for Tamiya Frog.
#10204

Unser Buggy 1/10 lexan body.

Direct replacement for the Associated RC10. Fits Kyosho Optima and other with use of a Parma body mount kit.

#10207
ASA Mustang 1/10 lexan body.
#10208
’83 NASCAR Monte Carlo 1/10 lexan body.
#10209
Sargent sprint car 1/10 lexan body.
#10210
AMC Sprint Modified 1/10 lexan body for Tamiya Fox.
#10211
ASA Buick Regal 1/10 lexan body.
#10212
Subaru Brat 1/10 lexan body for Tamiya Frog/Brat.
#10213
Grasshopper 1/10 lexan body for Tamiya Grasshopper.
#10214
Stinger 1/10 lexan body for Tamiya Grasshopper.
#10215
Chenowth 1/10 lexan body for RC10.
#10216
Chenowth 1/10 lexan body for Yokomo.
#10217
Outlaw Wedge 1/10 lexan body.
#10218
’63 Corvette 1/10 lexan body.
#10219
ASA Dodge Daytona 1/10 lexan body.
#10220
’67 Pontiac GTO 1/10 lexan body.
#10222
Frog Jumper 1/10 lexan body for Tamiya Frog.
#10223
Wells Coyote 1/10 lexan body for Tamiya Hotshot.
#10224
Chenowth 1/10 lexan body for Monogram/Optima.
#10225
Mustang off roader 1/10 lexan body.
#10226
944 Imsa Turbo Porsche 1/10 lexan body.
#10227
’33 Ford 3 window coupe 1/10 lexan body.
#10228
Big Bear Datsun 1/10 lexan body for Marui Big Bear.
#10229
VW Beetle 1/10 lexan body for Marui Big Bear.
#10230
The Sly One 1/10 lexan body for Tamiya Fox.
#10231
’36 Ford 1/10 lexan body.
#10232
’69 Dodge Charger 1/10 lexan body.
#10233
Osella PA9 Can Am 1/10 lexan body.
#10234
’57 Chevy 1/10 lexan body.
#10235
962 Porsche GTP 1/10 lexan body.
#10236
’86 NASCAR Monte Carlo 1/10 lexan body.
#10237
Desert Dog 1/10 lexan body for Kyosho Optima.
#10238
Eagle 1/10 lexan body for Associated RC10.
#10239
Lancia Rally 1/10 lexan body.
#10240
’69 Z28 Camaro 1/10 lexan body.
#10241
’27 T Roadster 1/10 lexan body.
#10242
’41 Willys Coupe 1/10 lexan body.
#10244
Ford F150 1/10 lexan body.
#10245
Ford Ranger 1/10 lexan body.
#10246
Outlaw S-10 1/10 lexan body.
#10247
Ford Sierra – Merkur XR4 Ti 1/10 lexan body.
#10248
Shark 1/10 lexan body.
#10249
’49 Mercury 1/10 lexan body.
#10250
Jeep Honcho 1/10 lexan body.
#10251
Oldsmobile Firenza Drag lexan body.
#10252
Top Fueler Rail Dragster lexan body.
#10253
Challenger sprint car 1/10 lexan body.
#10255
’39 Chevy 1/10 lexan body.
#10256
Dodge Van for Tamiya Lunchbox 1/12 lexan body.
#10259
’34 Sedan Delivery 1/10 lexan body.
#10257
Ford Escort Rally 1/10 lexan body.
#10262
Pontiac Nascar 1/10 lexan body.
#10263
Mud Bus 1/10 lexan body.
#10264
Hot Rod Hornet 1/10 lexan body.
#10265
Buick Nascar 1/10 lexan body.
#10266
’50 Ford 1/10 lexan body.
#10267
Olds Nascar 1/10 lexan body.
#10268
1/10 clear lexan bodies, Kyosho Ultima body, undertray & wing kit.
#10268B
1/10 clear lexan bodies, Kyosho Ultima replacement body.
#10268T
1/10 clear lexan bodies, Kyosho Ultima replacement undertray.
#10271
Body set for Schumacher CAT XLS, including body shell, undertray and wing.
#10271B
Body for Shumacher CAT XLS (part of #10271)
#10271T
Undertray for Shumacher CAT XLS (part of #10271)
#10284
Body set for Kyosho Optima Mid, including shell, undertray and wing.
#10284-B
Body shell for Kyosho Optima Mid (part of #10284).
#10284-T
Undertray for Kyosho Optima Mid (part of #10284).
#10400
Combination body detailing pen. Fine and medium points with permanent ink.
#10401
Off road wing .050 lexan, small.
#10402
Off road wing .050 lexan, large.
#10403
Lexan wing (part of #10284 & 10271).
#10404
Front wings fits Associated RC10, Kyosho Optima, Ultima & others.
#10405
Monster wing. 1/10 off road wing kit. Fits most cars.
#10406
Sprint car wing.
#10407
Pro stock scoop.
#10409-A
Fender skirt kit for ’49 Mercury.
#10409-B
Fender skirt kit for Blvd. Cruiser.
#10409-C
Fender skirt kit for ’57 Chevy.
#10410
Hood air scoops.
#10415
.030 lexan sheet for wings and things.
#10420
Window mask for ’33 Ford. Allows you to paint your body easier and faster.
#10450

v1

 

 

 

 

Universal adjustable body mount, fits RC10, Tamiya Hornet, Tamiya Grasshopper and other RC cars.

 

 

 

 

v2

#10451

Frog adjustable body mounts. Allows easy mounting of large bodies to your car.
#10452
Adjustable body mounts for Tamiya Fox.
#10455
Body mount washers, small hole.
#10456
Body mount washers, large hole.
#10476
Associated RC10 aluminum chassis dirt cover .010 lexan.
#10601
Off-road sponsor decal sheet.
#10602
Oval decal sheet.
#10603
Kendall motor oil decal sheet.
#10604
“Flames” decal sheet.
#10605
Lay’s chips decal sheet.
#10606
NASCAR decal sheet.
#10607
Hot Rod decal sheet.
#10608
Ford decal sheet.
#10609
GM decal sheet.
#10610
Löwenbrau decal sheet.
#10611
Tide decal sheet.
#10612
Folgers coffe decal sheet.
#10613
Kodiak decal sheet.
#10614
Levi Garrett decal sheet.
#10615
Wrangler decal sheet.
#10616
Hardee’s decal sheet.
#10617
BF Goodrich decal sheet.
#10618
Pennzoil decal sheet.
#10619
STP decal sheet.
#10620
Castrol decal sheet.
#10621
Quaker State decal sheet.
#10622
TRW decal sheet.
#10623
Piedmont Airlines decal sheet.
#10624
Scallop decal sheet.
#10630
Hershey’s decal sheet.
#10631
Red Roof Inn decal sheet.
#10633
Royal Crown Cola decal sheet.
#10634
Wynn’s/K-Mart decal sheet.
#10637
Crisco decal sheet.
#10647
Purolator decal sheet.
#10648
Zerex decal sheet.
#10657
Mobil 1 decal sheet.
#10658
4×4 decal sheet.
#10660-1
NASCAR number “1” decal sheet.
#10660-2
NASCAR number “2” decal sheet.
#10660-3
NASCAR number “3” decal sheet.
#10660-4
NASCAR number “4” decal sheet.
#10660-5
NASCAR number “5” decal sheet.
#10660-6
NASCAR number “6” decal sheet.
#10660-7
NASCAR number “7” decal sheet.
#10660-8
NASCAR number “8” decal sheet.
#10660-9
NASCAR number “9” decal sheet.
#10678
Red Baron Premium Pizza decal sheet.
#10684
Heinz Tomato Ketchup decal sheet.
#10688
Parma logo decal sheet.
#10701
ID number on white background #1.
#10702
ID number on white background #2.
#10703
ID number on white background #3.
#10704
ID number on white background #4.
#10705
ID number on white background #5.
#10705
Maxwell House decal sheet.

*Here we have a crash between what probably are old and new part numbering systems.

#10706
ID number on white background #6.
#10707
ID number on white background #7.
#10707
Snickers decal sheet.

*Here we have a crash between what probably are old and new part numbering systems.

#10708
ID number on white background #8.
#10709
ID number on white background #9.
#10709
Days of Thunder Hardee’s decal sheet.

*Here we have a crash between what probably are old and new part numbering systems.

#10710
ID number on white background #0.
#10711
Numbers on meat balls #1.
#10712
Numbers on meat balls #2.
#10713
Numbers on meat balls #3.
#10714
Numbers on meat balls #4.
#10715
Numbers on meat balls #5.
#10716
Numbers on meat balls #6.
#10717
Numbers on meat balls #7.
#10718
Numbers on meat balls #8.
#10719
Numbers on meat balls #9.
#10720
Numbers on meat balls #0.
#10745
Decal sheet.
#10747
Geometric shapes decal sheet.
#10771
Decal sheet.
#10815
Yokomo stock motor, dyno tested, 28T of 22 ga. Extra strong magnets.
#10816
Parma K Stock motor 28T of 22 ga. Extra strong magnets.
#10825
Enduro wind Parma Yokomo Modified motor, 2WD.
#10826
Sprint wind Parma Yokomo Modified motor, 4WD.
#10827
Super Sprint wind Parma Yokomo Modified motor.
#10830
Oval racing wind Parma Yokomo Modified motor for 3 min. 7 cell racing.
#10860
Enduro wind Parma K Modified motor, 2WD.
#10861
Sprint wind Parma K Modified motor, 4WD.
#10910
Enduro wind Parma Yokomo armature.
#10911
Sprint wind Parma Yokomo armature.
#10912
Super Sprint wind Parma Yokomo armature.
#10915
Oval racing wind Parma Yokomo armature, for 3 min. 7 cell racing.
#11001
Turbo intercooler aluminum motor end bell for Kyosho and Yokomo motors.
#11010
Dust cap for off road motors, vinyl.
#11011
Cool filter endbell dust cover, foam.
#11025

v1

 

 

 

 

360 deg. wrap-around aluminum motor heat sink for Cox/Kyosho Scorpion and other cars.

Beware that the “v2” in the newer packing (below) is a little bit narrower than the older “v1” version, even if the part #’s are the same..

 

 

 

 

v2

#11026
215 deg. wrap around motor heatsink, fits Yokomo, Associated RC10, Tamiya Frog, Hotshot, Grasshopper, and other cars.
#11027
145 deg. glue-on motor heat sink.
#11028
RC motor container.
#11050
Commutator cleaning sticks, fiberglass.
#11051
1/8″ spacers for motors & axles .005.
#11052
1/8″ spacers for motor & axles .010.
#11200
Discharge resistor with lamp.
#11201
Battery discharge resistor with Tamiya male plug.
#11202
Battery discharge resistor with alligator clips.
#11203
Battery straps for 6 cell sticks. Fits Kyosho Optima and others.
#11235
The 7th cell battery. Allows you to convert your 6 cell pack to a 7 cell very easily.
#11240
6 individual matched Sanyo SCR Hi-Output cells.Extra punch for stock motors.
#11244
7 individual matched Sanyo SCR Hi-Output cells. Extra punch for stock motors.
#11245
7 cell individual matched Sanyo sub C cells, layout to your needs.
#11249
6 cell matched Sanyo SCR Hi-Output battery pack. Extra punch for stock motors, with female plug, fits Bull Dog, Marui Samurai, most Tamiya cars and others.
#11250
6 cell matched Sanyo battery pack, with female plug, fits Bull Dog, Marui Samurai, most Tamiya cars and others.
#11251
6 cell matched Turbo Panasonic battery pack. Fits Bull Dog, Marui Samurai, most Tamiya cars and others.
#11252
6 cell matched Sanyos, with male plug, fits most Cox and Kyosho cars.
#11260
6 cell matched Sanyo battery hump pack with female plug, fits most Tamiya cars.
#11266
7 cell matched Sanyo SCR Hi-Output battery flat pack. Extra punch for stock motors, fits Hirobo, AYK, Bull Dog, Marui Samurai, Cox/Kyosho Tomahawk, Optima, Tamiya Bigwig and others.
#11267
7 cell matched Sanyo battery hump pack, with female plug, fits Tamiya Hotshot and most Tamiya cars, and others.
#11270
7 cell matchedSanyo battery hump pack, fits Associated RC10, Hirobo, Bolink, most Tamiya cars and others.
#11272
7 cell matched Sanyo flat battery pack, fits Hirobo, AYK, Bull Dog, Marui Samurai, Cox/Kyosho Tomahawk, Optima, Tamiya Bigwig and others.
#11273
7 cell matched Sanyo battery pack. For Associated RC10. Lowers center of gravity for improved handling.
#11275
Assembled charge chord with Tamiya plug for 6 cell.
#11276
Assembled charge chord with Tamiya plug for 7 cell.
#11325
2 1/2″ wide shrink wrap for 6 cell pack.
#11326
3″ wide shrink wrap for 7 cell hump pack.
#11327
3 1/2″ wide shrink wrap for 6 cell hump pack.
#11355
Peak detector converter. Instantly converts any DC charger into a peak detector charger.
#11510
1/10 resistor mount with dbl. barrel resistor heat sink & reverse. 0.4 ohm.
#11512
1/10 resistor mount with dbl. barrel resistor heat sink & reverse. 0.8 ohm.
#11515
1/10 speed control, fits Tamiya SRB, Cox/Kyosho Scorpion & RC10. Unassembled w/o reverse.
#11517
Resistor speed control with reverse.
#11518
1/10 speed control, fits Tamiya SRB, Cox/Kyosho Scorpion & RC10. Assembled with reverse.
#11530
Micro switch 15 amps.
#11608
1/10 resistor epoxy coated 1 ohm std. dbl. barrel.
#11615
1/10 resistor epoxy coated .4 ohm 90 dbl. barrel.
#11616
1/10 resistor epoxy coated .08 ohm 90 dbl. barrel.
#11801
Whip antenna & mounts, vertical.
#11802
Whip antenna & mounts, horizontal.
#11803-A
Flexible antenna for Futaba Magnum Jr, 27 MHz.
#11803-B
Flexible antenna for Futaba Magnum Jr, 75 MHz.
#12002
Front sponge slicks for Assoc. RC10.
#12004
Front sponge tires.
#12011
Front spiked-ribbed tires, fits 1 1/2 Tamiya wheels, narrow rib.
#12012
Front spiked-ribbed tires, fits 1 1/2 Tamiya wheels, wide rib.
#12013
Front grooved rubber tires, fits Tamiya Fox and Tamiya Wild One.
#12022
Rear spiked rubber tires for Tamiya Holiday Buggy and Associated RC10.
#12050
All terrain sponge tires. Dirt, grass, gravel, asphalt, cement, carpet.

Grooved fronts.

#12051
All terrain sponge tires. Dirt, grass, gravel, asphalt, cement, carpet.

Knobby tread fronts.

#12100
All terrain sponge tires. Dirt, grass, gravel, asphalt, cement, carpet.

Knobby tread rears.

#12107
Front track adjust wheels, fits all 2wd cars.
#12109
Aluminum front & rear hubs positive drive, fits Tamiya Hotshot etc.
#12110
Aluminum rear hubs for Tamiya Frog, positive drive.
#12111
Rear chrome wheels for Tamiya cars.
#12113
Rear track adjust. wheels.
#12210
Lightweight rear axle for Tamiya Grasshopper and Hornet.
#12500

Older packing

 

 

 

Outside gear dirt cover for Associated RC10.

 

 

 

Newer packing

#12501
Replacement plugs/Parma’s RC10 gear dirt cover.
#12596
BBS wheel adaptors, Tamiya (blue).
#12597
BBS wheel adaptors, Kyosho (orange).
#12598
BBS wheel adaptors, RC10 (yellow).
#12599
Monster wheel adapters.

Complete set for most Tamiya 4WD cars.

#12604
Monster wheel front adaptor nuts, fits most Tamiya cars.
#12605
Shock kit, front for Tamiya Frog.
#12607
Front shock absorber set. Fits most off road cars. Made in Taiwan.

Are these the same as the Blue Bird made Duratrax shocks?

#12608
Rear shock absorber set. Fits most off road cars. Made in Taiwan.
#12611
Rear mono shock for Monogram Lightning.
#12620

Parma shock kit.

Obviously came both assembled and unassembled.

#12621
Parma short shock kit.
#12631
Parma shocks, replacement parts, piston & rods.
#12632
Parma shocks, replacement parts,brass seals.
#12633
Shock protectors.
#12654
Shock mount (front) for Kyosho Optima.
#12659
Shock mount (rear) for Kyosho Optima.
#12660
Rear shock mount for large shocks for Kyosho Ultima.
#12801
Heavy duty rod ends.
#12802
Super heavy duty rod ends.
#12815
4-40 threaded connecting rod 9″
#12825
Heavy duty tie rod set for Cox/Kyosho Scorpion.
#12826
Heavy duty tie rod set for Tamiya SRB.
#12827
Heavy duty tie rod set for Tamiya Frog & Grasshopper.
#12831
Steering kit for Traxxas Cat using Parma servo saver.
#12846
Dual wheel adaptors for Tamiya Lunchbox. Made in Hong Kong.
#12849
Front stabilizer mounts, fits Kyosho Optima, Salute and Javelin.
#12850
Tamiya Hotshot front suspension arm bracket.
#12852
8mm front suspension balls – fits Tamiya Hotshot etc.
#12853
Bump steer eliminator kit for Tamiya Hotshot and Supershot.
#12854
Front adjustable upper front suspension arms for Tamiya Fox.
#12856
Front clip suspension balls for Kyosho Optima.
#12857
Parma-Link, strengthens front suspension of Kyosho Optima and Turbo Optima.
#12865
Front or rear adjustable slip/clutch differential, for Tamiya Hotshot, Supershot & Boomerang.
#12866
Front or rear adjustable slip/clutch differential, for Kyosho Optima & Javelin.
#12867
Front positive lock differential for Kyosho Optima & Javelin.
#12868
Dual wheel adaptors (front) for Tamiya Frog, Grasshopper and Hornet.
#12869
Replacement strut bar, fits Tamiya Wild One.
#13001
Tamiya Frog rear arm mount bushings.
#13002
Dual wheel adaptors (rear) for Tamiya Frog, Grasshopper and Hornet.
#13003
Adjustable rear arm bushings for Tamiya Striker. Allows camber & toe in adj.
#13201
Skid plate bumper for Tamiya SRB.
#13202
Front bumper for Tamiya Frog and Grasshopper.
#13203
Skid plate bumper for Associated RC10.

Regular.

#13204
Skid plate bumper for Associated RC10.

Small.

#13205
Skid plate bumper for Tamiya Fox.
#13206
Skid plate bumper for Associated RC10.

Wide for wide foot front end.

#13207
Skid plate bumper for Tamiya Falcon.
#13208
Skid plate bumper for AYK Radiant.
#13210
Bumper for Tamiya Striker.
#13213
Wide skid plate bumper for Kyosho Ultima.
#13214
Rear bumper for Associated RC10.
#13217
Front bumper for Kyosho Optima Mid.
#13224
Rear adjustable anti-roll bar for Tamiya Grasshopper and Hornet.
#13226
Front & rear adjustable anti-roll bar for Tamiya Hotshot.
#13227
Adjustable front anti-roll bar for Tamiya Fox.
#13228
Adjustable front anti-roll bar for Tamiya Fox.
#13230
Kyosho Optima adjustable rear anti-roll bar w/ mount.
#13235
Front heavy duty anti-roll bar mounts for Tamiya Hotshot.
#13275
Tamiya Frog side nerf guard.
#13278
Nerf guard for Tamiya Fox.
#13280
Nerf guards for Associated RC10.
#13401
Break free clip oil. Cleans, lubricates & preserves.
#13625
Wheel knock-off nuts, 4mm plastic, fits all Tamiya & Cox (Kyosho) cars (and others with 4mm thread).
#13626
Chrome plated wheel knock-off nuts, fits all Tamiya & Cox (Kyosho) cars (and others with 4mm thread).
#13630
Lightweight 4-40 nylon screw kit for Associated RC10.
#13631
Wing hold downs.
#13801
12v soldering iron, 60 watt.
#13850
Utility brush. For off road tires, slot braid and many other clean up jobs.
#13855-C
Handy sander. Polishing tool with replacement belts. Coarse grit.
#13855-F
Handy sander. Polishing tool with replacement belts. Fine grit.
#13855-M
Handy sander. Polishing tool with replacement belts. Mediume grit.
#13860-C
Replacement belts for handy sander. Coarse grit.
#13860-F
Replacement belts for handy sander. Fine grit.
#13860-M
Replacement belts for handy sander. Mediume grit.
#13870
Magnetic parts caddy.
#14001
4 x 19T Yokomo motor super sprint wind – 31.700 rpm.
#14010
2 x 19T Yokomo motor sprint wind 4WD.
#14013
2 x 20T Yokomo motor enduro wind 2WD.
#14016
4 x 15T Yokomo motor 4WD – 33.250 rpm.
#14018
4 x 15T Cyclone motor – 33.250 rpm.
#14019
4 x 17T Yokomo motor 4WD – 32.250 rpm.
#14025
2 x 16T Cyclone motor oval racing wind.
#14028
2 x 15T Cyclone drag motor – 35.000 rpm.
#14800
Outlaw cobalt magnets (may not be legal for some types of racing).
#17037
BBS flourescent wheels, front.
#17028
1/10 pre-trued donuts. Fits most on-road wheels. Front green.
#17029
1/10 pre-trued donuts. Fits most on-road wheels. Front blue.
#17128
1/10 pre-trued donuts. Fits most on-road wheels. Rear green.
#17129
1/10 pre-trued donuts. Fits most on-road wheels. Rear blue.
#17137
BBS flourescent wheels, rear.
#17141
Chrome wheels. Good time kit rear. (whatever that means???)
#17310
64 pitch spur gears, 98T.
#17311
64 pitch spur gears, 102T.
#17312
64 pitch spur gears, 106T.
#17313
64 pitch spur gears, 110T.
#17801
Crossbars & standoffs w/hardware, Pro Panther & Sprint.
#18015
Top damper plate for Pro Panther 10.
#18016
Dampener post for Pro Panther 10.
#18018
Flex plate for Pro Panther 10.
#18020
Flex plate spacer for Pro Panther 10.
#18052
Body posts 4″ long. 1 pair.
#18060
Ride height cams for Pro Panther 10.
#18650
On-road kit for 1/12 scratch builder. Rear pod, crossbar and front-end hardware.
#22370
Marine prop nut 10-32 thread.
#22378
Hatch lock kit for Ski Tiger.
#????
Ferrari motor.
#????
Porsche motor.
#????
6N-1200 SC saddle pack ni-cd.
#????
Yokomo motor.
#????
Super stock Cyclone II motor.
#????
Fiberglass. Chassis material.

Be the first to comment

Leave a Reply

Your email address will not be published.


*