CRP

CRP (Custom Racing Products) were owned by Mike Tobey, and were one of the early “tuners”, with classic products like the “Butterfly” chassis and monoshock systems for the Tamiya SRB’s. When Tobey left the company, things went downhill. Later all stock was sold on, and you can still buy some leftovers from the new “Team CRP” on eBay.

CRP changed their head cards quite often. Here’s a summary:

To the left is the first version with no logo and the old part # system. On the next one the logo is added. This one came with both the old and new part # systems. On the third variant a double border is added on three sides, and “INC.” is added to the name.

Then the word “Team” is added, before the 3-sided double border is changed to a full single line border with rounded edges, and the all upper case “CUSTOM RACING PRODUCTS INC.” is changed to lower case “Custom Racing Products, INC.”. This version also came with red lettering for the product # and description. I’m not sure if the black or the red came first.

The next variant gets a new style border, while the last one is a change to a generic head card, with space for a hand written product #, and no product description.

 

 

Part #
Picture Description
#1015
Butterfly chassis (long) for Tamiya SRB.
#1016
Skid Plate for Tamiya SRB.
#1017
Velcro battery straps.
#1018
Body post (short) for Tamiya SRB.
#1019
Body post (long) for Tamiya Sand Scorcher.
#1020
Radio box well nuts for Tamiya SRB.
#1021
Butterfly chassis (short) for Tamiya SRB.
#1022
Servo mounting plate for SRB Butterfly chassis..
#1023
Body mounting kit for SRB Butterfly chassis.
#1024
Cox/Kyosho Scorpion rear chassis support bracket.
#1025
Hirobo chassis.
#1026
Cox/Kyosho Scorpion chassis stiffener.
#1027
Yokomo chassis.
#1028
Tamiya Hotshot battery tray.
#1029
Saddle pack battery straps. Mounts 3×3 or 3×4 split packs into most 1/10th scale cars.
#1501
Heavy-duty stock steering for Tamiya SRB.
#1503
Servo saver.
#1504
Adjustable coil-overs for Tamiya SRB.
#1507

Heavy-duty front axle tubes for Tamiya SRB.

Old version (gold coloured) pictured below. The shock tower saver in the same pic may be another pack that lays under the #1507, or it may have been bundled with the axle tubes?

 

#1508
3/8″ wide front end for SRB Butterfly chassis.
#1509
1/2″ wide front end for SRB Butterfly chassis.

#1510

(old CRP-05)

Shock tower saver (stock) for Tamiya SRB.

#1512

(old CRP-07)

Shock tower saver wide (+ 1/2″) for Tamiya SRB.
#1514
Cox/Kyosho shock tower adapter for Tamiya SRB.
#1515
Cox/Kyosho Scorpion coil over springs & collars.
#1517
Cox/Kyosho Scorpion shock rebuild kit.
#1518
Tamiya SRB front shock rebuild kit.
#1519
Tie rod ends for 4-40 rod.
#1520
Tie rod end 4-40 rod 3mm ball.
#1521
Servo saver spring for Tamiya SRB.
#1522
Shock rebuild kit (short) for Tamiya SRB.
#1526
Adjustable coil over for Cox/Kyosho Scorpion.
#1527
Adjustable coil over (gold) for Cox/Kyosho Scorpion.
#1528
Cox/Kyosho Scorpion heavy-duty steering.
#1529
Shock O-rings.
#1530
Lowering blocks for Tamiya SRB.
#1532
Servo saver for Futaba servos.
#1534
Direct steering (S-26, 27).
#1535
Direct steering.
#1536
Rear shock adapter bracket for Cox/Kyosho Scorpion.
#1537
Sway bar kit (rear) for Tamiya SRB.
#1538
Quick steer system for Tamiya SRB.
#1539
Front end pins for Tamiya SRB.
#1540
Rear A-arm bushing kit for Tamiya SRB.
#1541
Rear axles for Tamiya SRB.
#1542
Cox/Kyosho Scorpion front shock adapters.
#1543
Front sway bar kit for Tamiya SRB.
#1544
Tie rod ends for 2-56 rod.
#1545
Kyosho shock valves.
#1546
Yokomo front shock brackets.
#1547
Rear axle springs for Tamiya Hornet.
#1548
Servo saver for Airtronics, Sanwa, KO, Challenger.
#1549
Large servo saver.
#1550
Heav-duty steering kit for Yokomo.
#1551
Front suspension pivot balls for Tamiya Hotshot etc.
#1552
Front stub axles (for Tamiya bearings) for Associated RC10.
#1553
Front stub axles (for Associated bearings) for Associated RC10.
#1554
Steering improvement kit for Marui Big Bear.
#1555
Coil-Over Clamps (set of 4) for Associated RC10, Kyosho Turbo Optima (Kyosho gold shocks).
#1556
Front Shock Kit for Tamiya Hornet, Grasshopper.
#1557
Front stub axles-wide (for Tamiya wheels) for Associated RC10.
#1558
Front Shock kit for Futaba FX10.
#1559
Stub Axles RC10 to MT.
#1560
Rear Wheel adapters – Fox Rear to RC10 Rear.
#1561
Body Mounts – RC10 to MT.
#1562
Basic Conversion Kit – RC 10 To Monster Truck.
#1563
Deluxe Conversion Kit – RC 10 To Monster Truck.
#1564
Dual Body Post Adaptors fits CRP Monster Truck Conversions for Associated RC10 1561-1563 & Kyosho Ultima 1716-1718.
#1565
Front monster truck wheel adaptor nuts for Tamiya Hornet, Grasshopper.
#1566
Monster truck body mount for Tamiya Hornet, Grasshopper.
#1567
Basic moster truck conversion kit for Tamiya Hornet, Grasshopper.
#1568
Deluxe Conversion Kit – Hornet, Grasshopper, Manx.
#1569
Front monster truck wheel adaptor nuts for Futaba FX10.
#1570
Rear Wheel Adaptors.
#1571
Front and rear monster truck body mounts for Futaba FX10.
#1572
Basic FX10 to monster truck conversion kit.

Contains #1569, #1570, #1571 and body posts.

#1573
Deluxe FX10 to Monster Truck Conversion Kit.
#1574
Coil Over Clamps – Blackfoot, King Cab, Hi Lux.
#1575
Front Dual Shock Kit – Lunchbox, Midnight Pumpkin.
#1576
Rear Dual Shock Kit – Lunchbox, Midnight Pumpkin.
#1577
?
#1578
Rear shock dampening upgrade kit for Associated RC10T.
#1601
Front shock kit for Tamiya Frog.
#1602
Rear adjustable coil-overs for Tamiya Frog, Wild One.
#1603
Heavyduty steering for Tamiya Frog, Brat.
#1604
Heavy duty steering for Tamiya Hornet, Grasshopper.
#1605
Rear Axles for Tamiya Frog, Brat etc.
#1606
Rear suspension supports for Tamiya Blackfoot, Monster Beetle, Mud Blaster, Frog, Brat.
#1607
Front suspension arms for Tamiya Frog, Blackfoot, Monster Beetle.
#1608
Differential bearing supports for Tamiya Blackfoot, Monster Beetle, Mud Blaster, Frog, Brat.
#1609
Steering kit for Tamiya Fox, Wild One.
#1610
Front sway bar for Tamiya Fox.
#1611
Adjustable coil-overs for Tamiya Fox, Boomerang.
#1612
?
#1613 v1
Tamiya Rear Hubs – Frog, Brat, Hornet, Grasshopper, Wild One, Fast Attack, Blackfoot, Lunch Box, Midnight Pumpkin, etc
#1613 v2
Heavy-duty steering kit for Tamiya Lunchbox.
#1614
Front A-arm stabilizer for for Tamiya Fox.
#1615
Rear Shock Bracket for Fox
#1616
Rear axles for Tamiya Falcon, Striker and Futaba FX10.
#1617

Steering kit for Tamiya Blackfoot, Monster Beetle, Mud Blaster.
#1618
Steering blocks for Tamiya Blackfoot, Monster Beetle.
#1619
Shock rebuild kit for #1556 and #1601 shocks.
#1620
Chassis Support/Front Bumper – Falcon
#1621
Front Steering Arms – Tamiya Grasshopper, Hornet, Wild One.
#1622
Rear Shock Mounts for Blackfoot, Monster Beetle, Frog
#1623
Rear body mounts for Tamiya Blackfoot.
#1624
Rear body post supports for Tamiya Blackfoot.

#1622 shock mounts necessary to mount these supports.

#1625
Heavy duty steering kit for Futaba FX-10 & Tamiya Striker, Sonic Fighter.
#1626
Front double A-arm suspension for Futaba FX-10.
#1627
Front shock tower support for Tamiya Blackfoot.

#1624 required.

#1628
Upper chassis support system for?
#1629
Drive train upgrade kit for Futaba FX-10 & Tamiya Striker, Sonic Fighter.
#1630
Replacement axle roll pins for Futaba FX-10 & most Tamiya cars.
#1631
Replacement Shocks for #1556, #1601 & #1626.
#1632
Plastic Replacement Parts for CRP #1626, for Futaba FX10.
#1633
Replacement E-clips for Tamiya King Cab, Astute and CRP #1626.
#1634
Replacement rear hubs for Tamiya Blackfoot, Frog, Hornet and most Tamiya 5 prong rear wheels.
#1635
Front Body Post – Blackfoot
#1650
A-arm stabilizer for Tamiya Hot Shot, Super Shot, Big Wig, Boomerang.
#1653
Adjustable coil-overs for Tamiya Super Shot, Falcon, Big Wig (set of 4).
#1701
Trailing arm pivots for Cox/Kyosho Scorpion.
#1702

Rear hubs for fitting Tamiya SRB (and/or Holiday Buggy) wheels to Cox/Kyosho Scorpion.
#1703
Front sway bar for Cox/Kyosho Scorpion.
#1704
Front trailing links for Cox/Kyosho Scorpion.
#1705
Servo saver support for Cox/Kyosho Scorpion.
#1706
Rear axle assembly (universal joint) for Cox/Kyosho Scorpion.
#1707
Front arm shaft for Cox/Kyosho Scorpion.
#1708
Adjustable motor mount for Cox/Kyosho Scorpion.
#1709
Front Shock Mount for Kyosho Optima. Uses RC10 short shocks.
#1710
Rear Shock Mount for Kyosho Optima. Uses RC10 long shocks.
#1711
Adjustable coil-over collars (set of 4) for Kyosho Optima, Ultima.
#1712
Front stub axles, mounts Tamiya wheels to Kyosho Ultima and Turbo Ultima.
#1713
Front stub axles – wide, mounts Tamiya wheels to Kyosho Ultima and Turbo Ultima.
#1714
Front Stub Axles – Ultima to Monster Truck
#1715
Rear wheel adaptors – pair. Converts Kyosho Ultima to Monster truck.
#1716
Body mount F&R mounts truck bodies on Kyosho Ultima.
#1717
Basic conversion kit to monster truck for Kyosho Ultima.
#1718
Ultima Deluxe Kit/Complete Ultima Conversion Kit to Monster Truck
#2101
Large Brass Gear for Tamiya SRB.
#2102
Small Brass Gear for Tamiya SRB.
#2103
Ball bearings for Tamiya SRB.
#2104
Drive Gear Set for Tamiya SRB.
#2107
Adjustable motor mount for Tamiya Blackfoot, Monster Beetle, Frog.
#2108
Counter gear for Cox/Kyosho Scorpion.
#2109
Pinion Gear 12T for Cox/Kyosho Scorpion.
#2110
Pinion Gear 16T for Cox/Kyosho Scorpion.
#2112
Ball Diff for Tamiya Frog etc.
#2115
Bearings (850) – 5 pieces – for Tamiya Hotshot, Supershot, Bigwig, Boomerang, Hotshot II.
#2116
(850) Ball bearings – 2 Per Package – For Tamiya Wild One, Hornet, Grasshopper.
#2117
Pinion gear organizer.
#2118
Motor Cleaner
#2119
Bearing Cleaner
#2120
Adjustable motor mount for Tamiya Clodbuster.
#2150

Motor capacitors.

These came in various versions.

#2151
Resistor heat sink.
#2152
Battery discharge resistor.
#2154
Motor/battery connector.
#2155
Wiper arm.
#2156
Resistor Plate for Tamiya Frog/Brat.
#2157
Motor Tube
#2158
Motor End Bell cover, Foam
#2159
Battery connector – Tamiya style.
#2160
Tamiya Style Connectors, unassembled
#2161
Discharge resistors.
#2162
Shrink tube.
#2163
Resistor plate – 3 Prong. For all Tamiya cars with 3 prong resistor.
#2501
Metric screw set.
#2502
Metric Nut Set
#2503
Metric set screws.
#2504
Metric axle nuts.
#2505
3mm x 20 screws.
#2506
Metric allen wrenches, 1.5, 2, 2.5 mm.
#2507
  Body post clips.
#2508
1.5mm Ball End Driver
#2509
2.5mm Ball End Driver
#2510
3/32″ Ball End Driver
#2511
Tie Wraps, 20-4″
#2512
Servo tape.
#2513
Button head screw set.
#2514
2-56 screws.
#2515
Kyosho shock snap rings.
#2516
.010 Shims (5mm) for Tamiya, Kyosho.
#2517
.015 Shims (5mm) for Tamiya, Kyosho.
#2518
Self stick velcro.
#2519
Radio box velcro.
#2520
Cox/Kyosho shims.
#2521
Shims for Tamiya Frog/Brat.
#2522
Tie Wraps, Assorted
#2523
Battery door clip for Tamiya Frog, Brat.
#2524
Shims for Tamiya Fox, Hotshot.
#2525

3x20mm upright pivot pins for Tamiya Grasshopper, Hornet, FAV, Wild One, Road Wizard.
#2526
4-40 all threaded rod.
#2527
Reuseable cable ties – 8″.
#2528
6.40 hardware package, fits CRP #1552, #1553, #1557 stub axles.
#2529
Body posts.
#2530
Swivel mount body posts.
#2531
Foam Body Pads
#2532
4.40 x 1/8″ Set Screws
#2533
3x4mm Set Screws
#2534
Body guard – 30 square inches.
#2535
Easy Grip Body Clip
#2536
Magnetic E-Clip Remover
#2705
Body buttons – Low profile.
#2706
Body buttons – Mini grip.
#2707
Universal body button mounting kit.
#2708
Body button mounting kit for Associated RC10.
#2709
“Body Button” kit for Losi JRX2.
#2710
Body button mounting kit for Futaba FX10.
#2711
Body button mounting kit for King Cab/Hilux.
#2712
Body button mounting kit for Tamiya Clodbuster.
#2713
Body button mounting kit for Tamiya Blackfoot.
#2714
Body button kit for Associated RC10T.
#3010
Poly-Flex front bumper for Tamiya SRB.
#3013
Clamp-On Antenna
#3015
Aluminum nerf bars for Tamiya SRB.
#3017
Front bumper for Kyosho Scorpion & AYK.
#3018
Skid plate for Cox/Kyosho Scorpion.
#3020
Aluminum rear bumper for Tamiya SRB.
#3021
Body Mount Antenna
#3022
Nerf Wings for Cox/Kyosho Scorpion.
#3023
Antenna tube.
#3030
RC10 Front Bumper
#3031
Nerf wing for Associated RC10.
#3032
Rear bumper for Associated RC10.
#3040

Front bumper for Tamiya Hornet and Grasshopper.
#3041
Rear bumper for Tamiya Blackfoot, Frog.
#3042
Frog, Brat, Lancia Nerf Wings
#3043
Chassis stiffener for Tamiya Frog, Brat, Blackfoot, Monster Beetle.
#3044

Black version.

 

Bumper for Tamiya Frog/Brat.

 

White version.

#3045
Rear Skid Plate for Tamiya Blackfoot, Frog.
#3046
Nerf wings for Tamiya Hot Shot and Super Shot. Mounts on both CRP #1028 battery tray and on the standard battery tray (holes need to be drilled).
#3047
Front bumper for Losi JRx2 and Kyosho Ultima.
#3048
Front chassis stiffener and bumper for Futaba FX10.
#3049
Receiver Mount – RC10, JRX2
#3050
Rear Bumper for Losi Jrx-2, Tamiya Astute, King Cab
#3051
Front Bumper – RC10T
#3061
Tamiya Three Point Nerf Bars
#3062
Tamiya Modified Cage
#3063
Tamiya Full Roll Cage
#3064
Tamiya Stock Rear Cage
#3081
Three point Nerf bars for Cox/Kyosho Scorpion.
#3082
Full rear cage for Cox/Kyosho Scorpion.
#3501
Bearing Oil
#3502
Shock Oil – 10w
#3503
Shock Oil – 15w
#3504
Shock Oil – 20w
#3505
Shock Oil – 30w
#3506
Shock Oil – 5w
#3507
Gear Oil
#3508
Moly Grease 1/2 oz.
#3509
Shock Oil – 40w
#3510
Shock Oil – 50w
#4101
Rear aluminum wheel covers for Tamiya Holiday Buggy wheels.
#4102

Rear aluminum (gold coloured) wheel covers for Tamiya Holiday Buggy wheels.
#4103
Front wheel covers 1-1/2″ diameter for Tamiya Frog etc.
#4104
Chrome rear wheel covers 1.5″ diameter for Tamiya Sand Scorcher, Super Champ, Frog, Hornet and Grasshopper wheels.
#4105
Chrome front wheel covers 1.75″ diameter for Tamiya Rough Rider wheels.
#4106
Chrome rear wheel covers 1.75″ diameter for Tamiya Rough Rider wheels.
#4107
Chrome front wheel covers (w/holes) 1.5″ diameter for Tamiya Sand Scorcher, Super Champ, Frog, Hornet and Grasshopper wheels.
#4108
Chrome rear wheel covers (w/holes) 1.5″ diameter for Tamiya Sand Scorcher, Super Champ, Frog, Hornet and Grasshopper wheels.
#4109
Chrome front wheel covers (w/holes) 1.75″ diameter for Tamiya Rough Rider.
#4110
Chrome rear wheel covers (w/holes) 1.75″ diameter for Tamiya Rough Rider.
#4111
One piece front wheels for Tamiya Fox, Wild One.
#4112
Tamiya Wheel Adapter to RC10 Front (Set of 4)
#4113
1 piece rear wheels for Associated RC10.
#4114
Wheel adapter fits Tamiya Hotshot wheels to Kyosho Optima.
#4115
Front Wheel Adapter for Cox/Kyosho Scorpion.
#4116
Front wheels for Tamiya Hotshot, Supershot, Boomerang, Bigwig, Hotshot II etc.
#4117
Rear wheels for Tamiya Hotshot, Supershot, Boomerang, Bigwig, Hotshot II etc.
#4118
Optima, Turbo Optima Wheels
#4119
Rear Wheels – Fox
#4120
Rear wheel adapters. Fits Tamiya Fox wheels to Associated RC10.
#4121

Rear wheel adapters – Tamiya Fox rear wheels to Tamiya Frog, Hornet, Grasshopper.
#4122
Front Wheel 1-1/8″ Wide
#4123
Front Wheel 1-3/8″ Wide
#4124
Tire Spikes – 100 Pieces
#4125
Front Wheel – Blackfoot, Monster Beetle
#4126
Rear Wheel – Blackfoot, Monster Beetle
#4127
Wheels – Clodbuster (Front or Rear)
#4128
1/10 scale front on-road wheel
#4129
1/10 scale rear on-road wheel
#4130
Rear wheel adaptor, 4129 to RC10
#4131
Front Universal Dual Wheel
#4132
Rear Universal Dual Wheel
#4133
Front Universal Dual Wheels and Tires
#4134
Rear Universal Dual Wheels and Tires
#4150
Foam Tire Inserts 1.9″ Front
#4151
Foam Tire Inserts 1.9″ Rear
#4152
Foam Tire Inserts 1.5″ Rear
#4153
Foam Tire Insert Blackfoot
#4154
Foam Tire Insert Clodbuster
#4206
Dynamite V-Spike Truck Tire
#4207
Dynamite Tire – Clodbuster
#4208
Dynamite Monster Truck Tires – Spiked – Blackfoot, Monster Beetle, Mud Blaster
#4209
Monster Truck Tires – Blackfoot, Monster Beetle
#4211
Dynamite front tires, spiked. For Tamiya Hotshot, Supershot, Big Wig, Boomerang and PB Mini Mustang etc.
#4212
Dynamite Rear Tire – HS, SS, Fox
#4213
Dynamite Rear Tire – Tamiya 1-1/2″
#4214
Dynamite RC10/Yokomo
#4216
Dynamite front tires, spiked 1.5″
#4217
Dynamite Front Smooth Tire – Tamiya 1-1/2″
#4218
Ribbed front tires for Associated RC10.
#4220
Dynamite front tires combo (whatever that means?) for Tamiya 1.5″ wheels (Sand Scorcher, Frog etc.)
#4221
Dynamite On-Road Rear Tires, 1.5″
#4222
Front Tire – Ribbed – Fox, Wild One
#4223
Dynamite front tires, spiked
#4224
Dynamite rear tires, superspiked
#4225
Dynamite rear tires, super spike for Associated RC10, Yokomo and CRP #4113 wheels.
#4226
Dynamite front tires, round spike for Tamiya Hotshot, Boomerang, Bigwig, PB Mini Mustang etc.
#4227
Dynamite RR Tire – HS, TO, MM
#4228
Dynamite Rear Tire – HS, Fox, Big Wig
#4229
Dynamite rear tires, circle tread. Fits CRP wheels #4117, #4118, #4119, Tamiya Hotshot, Shupershot, Fox, Wild One, Kyosho Turbo Optima, Ultima, PB Mini Mustang, Schumacher Cat etc.
#4230
Schumacher cat front tires (Spike 3-Row) 1.9-2″
#4231
Schumacher cat rear tires (Spike 4-Row) 1.9-2″
#4232
Rear tires, low, 1.9-2.0″
#4233
Rear tires, pin spikes 1.9-2.0″
#4234
Dynamite Rear Tire – RC10
#4235
Dynamite front tires, tall spikes. Fits CRP #4116 and #4123 wheels.
#4236
Dynamite rear tires, Tall pin Spikes
#4237
Front Tire – Cat Mini Pin Spike
#4238
Rear Tires for Schumacher Cat, FX-10, Astute, Raider
#4239
Mini Pin Spike Tire for 2″ Rims – FX-10, Striker, Sonic Fighter
#4240
2″ soft single-rib front tires.
#4241
Front Tire “Off-Road Tire Bargain!”
#4242
Rear Tire “Off-Road Tire Bargain!”
#5000
12V DC Quick Charger II
#5001
Cigarette Lighter Adapter for Chargers
#5003
DC Ni-Cd charger/discharger and motor tester.
#5006
12V DC Cell Lab Discharger Tester
#5008
Adapter Plug – Tamiya to Aligator
#5140
Screw set for?
#6000
Ford Truck Body
#6001
Wing for any 1/10 or 1/12
#6002
FX-10 Replacement Body
#6003
“Style Side” Truck Body
#8000
Basic Upgrade Kit – Frog
#8001
Basic upgrade kit for Tamiya Hornet and Grasshopper.

Kit contains #1604, #2158, #4103 and #4104.

#8002
Basic upgrade kit – Tamiya Hotshot, Supershot.
#8003
Basic Upgrade Kit – Wild One
#8005
RC Maintenance Kit
#8101
1/8th Scale Air Filter
#8102
Filter Element
#8103
Filter Oil
#9101
Futaba Radio Springs
#9102
Hi-Temp Wire
#9103
Tamiya Switch Adapter Plate
#9104
Kyosho springs for ?
#9105
Springs – Tamiya Super Champ.
#9106
Quik-Steer servo saver.
#9107
Replacement Springs for #1601
#9108
Ball Caps for #1603, Assoc
#9109

Shock mount update kit for #1601 (Tamiya Frog etc).
#9110
R/C 10 O-Rings Large
#9111
Decals – Team CRP
#9112
O-Rings Kit for 1556, 1601
#9113
Shock Pressure Gaskets – RC10
#9114
Replacement shock towers for #1601 shock kit.
#9115
Antenna Caps
#9126
Shock spring clamps.
#9127
Bushings.
#BK58058
12 piece ball bearing set for Tamiya Blackfoot.
PROTOTYPE
Prototype magnesium chassis for Tamiya SRB made around 2007. Only two were made.

2 Comments

  1. How does one send you pictures. I have a few of the CRP items you are missing. I bought out RC Chop Shop that still has some pics also (he was one fo the 2 guys that bought out the CRP inventory some year back from where it was sitting.

Leave a Reply

Your email address will not be published.


*